可燃有害氣體探測器Flammable and harmful gas detector
氣體檢測儀功能強大，配置齊全；大屏幕液晶顯示屏，可實時顯示檢測的氣體名稱、氣體單位、現場濃度值等信息；工作指示燈（綠）、報警指示燈（紅）、故障指示燈（黃）、監測狀態，一目了然；國外原裝進口氣體傳感器，反應靈敏，測量精準；32位納米級微處理器+24位超高ADC采集芯片，反應速度更快，檢測數值更穩定；全量程溫濕度補償及智能運算，確保監測數據準確無誤；一體式聲光報警器，簡潔大方；當現場監測氣體濃度值達到預設報警點時，會自動發出85dB以上聲光報警、提醒人員安全撤離；還可選配開關量信號，與風機、切斷閥、噴淋系統等設備進行聯動，自動處置險情；紅外遙控器，無需開蓋即可對現場氣體報警器進行調零、高低報設置、氣體校準等服務；獨有三防設計（防高濃度過載+防人員誤操作+防雷擊），安全系數可與國外原裝進口氣體檢測儀相媲美：
檢測儀設計簡單，安裝布線方便；按有無顯示和信號輸出的不同，共分為BD-6000A系列液晶顯示型RS485信號輸出氣體檢測儀、BD-6000B系列液晶顯示型4-20mA信號輸出氣體檢測儀、BD-6000E系列無顯示型RS485信號輸出氣體檢測儀和BD-6000F系列無顯示型4-20mA信號輸出氣體檢測儀；具體區別請參照下面產品參數列表。
二、在線式防爆型氣體檢測儀產品特點
●支持1000多種可燃、有毒和揮發性氣體檢測；
●本質安全型電路設計、安全可靠；
●資質齊全（防爆證），安全有保障；
●24小時實時在線監測，安全無憂；
●采用國際一線品牌氣體傳感器，長期穩定不漂移；
●反應靈敏、測量精準、抗干擾能力強；
●支持PPM、%LEL、%VOL、mg/m3等多種檢測單位
●中文或英文操作系統可選，真正的全球通；
●4-20mA、RS485、0-5V電壓等多種信號輸出可選；
●良好的密封性，耐壓、隔爆、抗電磁干擾；
●使用方式多樣，可單機接220V電源使用，也可與系統配套使用；
●聲光報警器一體化、模塊化設計，易于安裝，；
●人性化設計，客戶可根據需要自行修改報警點；
●內置按鍵設計+恢復出廠設置功能，避免人員誤操作；
●自帶全量程溫度補償和數據修正，大幅提高產品的精度性和穩定性；
●空氣中零點自動校準，確保產品不誤報；
●2組開關信號輸出，方便與風機或電磁閥的控制設備聯動使用；
●可通過遙控器，免開蓋對檢測儀進行報警點、零點調整和目標點標定；
●不銹鋼銘牌，產品規格永不褪色、永不遺失；
●獨特的結構設計，安裝、布線簡單方便，節約成本。
●鋁合金鑄體防爆外殼，堅固耐用；
The gas detector is powerful and fully equipped; it features a large-screen liquid crystal display that can display real-time information such as the name of the detected gas, its unit, and the on-site concentration value; there are working indicator lights (green), alarm indicator lights (red), fault indicator lights (yellow), and monitoring status, all clearly visible; it uses original imported foreign gas sensors with high sensitivity and precise measurement; it is equipped with a 32-bit nano-level microprocessor and a 24-bit ultra-high ADC acquisition chip, resulting in faster response speed and more stable detection values; it has full-scale temperature and humidity compensation and intelligent calculation to ensure accurate monitoring data; it comes with an integrated sound and light alarm; when the gas concentration value at the site reaches the preset alarm point, it will automatically emit an 85dB or higher sound and light alarm to alert personnel to evacuate safely; it can also be equipped with switch quantity signals to聯動 with fans， cut-off valves， spray systems， etc.， for automatic handling of emergencies； it has an infrared remote control that allows for zero adjustment， high and low alarm settings， and gas calibration of the on-site gas alarm without opening the cover； its unique three-proof design (against high concentration overload， against personnel misoperation， and against lightning strikes) ensures a safety coefficient comparable to that of original imported foreign gas detectors：
The detector is designed simply and is easy to install and wire； it is divided into the BD-6000A series with liquid crystal display and RS485 signal output for gas detection， the BD-6000B series with liquid crystal display and 4-20mA signal output for gas detection， the BD-6000E series without display and RS485 signal output for gas detection， and the BD-6000F series without display and 4-20mA signal output for gas detection； specific differences can be referred to the following product parameter list.
II. Online Explosion-proof Gas Detector Product Features
● Supports the detection of 1000+ flammable， toxic， and volatile gases；
● Has an intrinsically safe circuit design， ensuring safety and reliability；
● Has complete qualifications (explosion-proof certificate)， ensuring safety and security；
● Provides 24-hour real-time online monitoring， ensuring safety and peace of mind；
● Uses international first-line brand gas sensors， with long-term stability and no drift；
● Has high sensitivity， precise measurement， and strong anti-interference ability；
● Supports multiple detection units such as PPM， %LEL， %VOL， and mg/m3；
● Offers the option of a Chinese or English operating system， truly global compatibility；
● Provides multiple signal outputs such as 4-20mA， RS485， and 0-5V voltage；
● Has good sealing properties， resistance to pressure， explosion-proof， and anti-electromagnetic interference；
● Has multiple usage methods， can be used independently with a 220V power supply， or can be used in conjunction with a system；
● The sound and light alarm is integrated and modularized， making installation easy；
● Humanized design allows customers to modify the alarm points as needed；
● Built-in key design + factory reset function to avoid personnel misoperation；
● Comes with full-scale temperature compensation and data correction to significantly improve the accuracy and stability of the product；
● Automatically calibrates the zero point in the air to ensure no false alarms；
● Provides 2 groups of switch quantity outputs to facilitate linkage with fans or electromagnetic valves control equipment；
● Can be adjusted， zeroed， and targeted point marked for the detector using the remote control without opening the cover；
● Has a stainless steel nameplate， ensuring the product specifications never fade or get lost；
● Unique structural design， making installation and wiring simple and cost-effective.
● Aluminum alloy cast body explosion-proof housing， sturdy and durable；
